RETURN ON INVESTMENT IN SOCIAL NETWORKS

This review focuses on electrochemical metallization memory cells (ECM), highlighting their advantages as the next generation memories. In a brief introduction, the basic switching mechanism of ECM cells is described and the historical development is sketched. In a second part, the full spectra of materials and material combinations used for memory device prototypes and for dedicated studies are presented. In a third part, the specific thermodynamics and kinetics of nanosized electrochemical cells are described. The overlapping of the space charge layers is found to be most relevant for the cell properties at rest. The major factors determining the functionality of the ECM cells are the electrode reaction and the transport kinetics. Depending on electrode and/or electrolyte material electron transfer, electro-crystallization or slow diffusion under strong electric fields can be rate determining. In the fourth part, the major device characteristics of ECM cells are explained. Emphasis is placed on switching speed, forming and SET/RESET voltage, R(ON) to R(OFF) ratio, endurance and retention, and scaling potentials. In the last part, circuit design aspects of ECM arrays are discussed, including the pros and cons of active and passive arrays. In the case of passive arrays, the fundamental sneak path problem is described and as well as a possible solution by two anti-serial (complementary) interconnected resistive switches per cell. Furthermore, the prospects of ECM with regard to further scalability and the ability for multi-bit data storage are addressed

Experimental and Modeling Study of Metal–Insulator Interfaces to Control the Electronic Transport in Single Nanowire Memristive Devices

Memristive devices relying on redox-based resistive switching mechanisms represent promising candidates for the development of novel computing paradigms beyond von Neumann architecture. Recent advancements in understanding physicochemical phenomena underlying resistive switching have shed new light on the importance of an appropriate selection of material properties required to optimize the performance of devices. However, despite great attention has been devoted to unveiling the role of doping concentration, impurity type, adsorbed moisture, and catalytic activity at the interfaces, specific studies concerning the effect of the counter electrode in regulating the electronic flow in memristive cells are scarce. In this work, the influence of the metal-insulator Schottky interfaces in electrochemical metallization memory (ECM) memristive cell model systems based on single-crystalline ZnO nanowires (NWs) is investigated following a combined experimental and modeling approach. By comparing and simulating the electrical characteristics of single NW devices with different contact configurations and by considering Ag and Pt electrodes as representative of electrochemically active and inert electrodes, respectively, we highlight the importance of an appropriate choice of electrode materials by taking into account the Schottky barrier height and interface chemistry at the metal-insulator interfaces. In particular, we show that a clever choice of metal-insulator interfaces allows to reshape the hysteretic conduction characteristics of the device and to increase the device performance by tuning its resistance window. These results obtained from single NW-based devices provide new insights into the selection criteria for materials and interfaces in connection with the design of advanced ECM cells

Effect of electrode materials on resistive switching behaviour of NbOx-based memristive devices

Memristive devices that rely on redox-based resistive switching mechanism have attracted great attention for the development of next-generation memory and computing architectures. However, a detailed understanding of the relationship between involved materials, interfaces, and device functionalities still represents a challenge. In this work, we analyse the effect of electrode metals on resistive switching functionalities of NbOx-based memristive cells. For this purpose, the effect of Au, Pt, Ir, TiN, and Nb top electrodes was investigated in devices based on amorphous NbOx grown by anodic oxidation on a Nb substrate exploited also as counter electrode. It is shown that the choice of the metal electrode regulates electronic transport properties of metal–insulator interfaces, strongly influences the electroforming process, and the following resistive switching characteristics. Results show that the electronic blocking character of Schottky interfaces provided by Au and Pt metal electrodes results in better resistive switching performances. It is shown that Pt represents the best choice for the realization of memristive cells when the NbOx thickness is reduced, making possible the realization of memristive cells characterised by low variability in operating voltages, resistance states and with low device-to-device variability. These results can provide new insights towards a rational design of redox-based memristive cells

An EMF cell with a nitrogen solid electrolyte-on the transference of nitrogen ions in yttria-stabilized zirconia

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.The mobility and electrochemical activity of nitrogen inside and/or at the surface of ionic compounds is of fundamental, as well as of possibly practical, relevance. In order to better understand the role of nitrogen anions in solid electrolytes, we measured the transference number of nitrogen in yttria-stabilized zirconia (YSZ) by a concentration cell technique as a function of oxygen activity at different temperatures in the range of 1023 ≤ T/K ≤ 1123. YSZ doped with 1.9 wt% of N (YSZ:N) turned out to have an appreciable nitrogen transference number, which increased from 0 to 0.1 with decreasing oxygen activity in the range of −20 < logaO2 < −14. The stability of N in YSZ:N, however, has yet to be elucidated under oxidizing conditions.DFG, SPP 1136, Substitutionseffekte in ionischen Festkörper

Brain‐Inspired Structural Plasticity through Reweighting and Rewiring in Multi‐Terminal Self‐Organizing Memristive Nanowire Networks

open8sìActing as artificial synapses, two‐terminal memristive devices are considered fundamental building blocks for the realization of artificial neural networks. Current memristive crossbar architectures demonstrate the implementation of neuromorphic computing paradigms, although they are unable to emulate typical features of biological neural networks such as high connectivity, adaptability through reconnection and rewiring, and long‐range spatio‐temporal correlation. Herein, self‐organizing memristive random nanowire (NW) networks with functional connectivity able to display homo‐ and heterosynaptic plasticity is reported thanks to the mutual electrochemical interaction among memristive NWs and NW junctions. In particular, it is shown that rewiring and reweighting effects observed in single NWs and single NW junctions, respectively, are responsible for structural plasticity of the network under electrical stimulation. Such biologically inspired systems allow a low‐cost realization of neural networks that can learn and adapt when subjected to multiple external stimuli, emulating the experience‐dependent synaptic plasticity that shape the connectivity and functionalities of the nervous system that can be exploited for hardware implementation of unconventional computing paradigms.openGianluca Milano; Giacomo Pedretti; Matteo Fretto; Luca Boarino; Fabio Benfenati; Daniele Ielmini; Ilia Valov; Carlo RicciardiMilano, Gianluca; Pedretti, Giacomo; Fretto, Matteo; Boarino, Luca; Benfenati, Fabio; Ielmini, Daniele; Valov, Ilia; Ricciardi, Carl

An EMF cell with a nitrogen solid electrolyte-on the transference of nitrogen ions in yttria-stabilized zirconia

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.The mobility and electrochemical activity of nitrogen inside and/or at the surface of ionic compounds is of fundamental, as well as of possibly practical, relevance. In order to better understand the role of nitrogen anions in solid electrolytes, we measured the transference number of nitrogen in yttria-stabilized zirconia (YSZ) by a concentration cell technique as a function of oxygen activity at different temperatures in the range of 1023 ≤ T/K ≤ 1123. YSZ doped with 1.9 wt% of N (YSZ:N) turned out to have an appreciable nitrogen transference number, which increased from 0 to 0.1 with decreasing oxygen activity in the range of −20 < logaO2 < −14. The stability of N in YSZ:N, however, has yet to be elucidated under oxidizing conditions.DFG, SPP 1136, Substitutionseffekte in ionischen Festkörper